Eminence Delta-10 A

Eminence Delta-10 A

Eminence Delta-10 A

Eminence Delta-10 A

Eminence Delta-10 - 8 Ohm - Ferrite


Type: TMT
Size: 10"
VC: 63,5mm
Impedance: 8 Ohm
Power: 350 W (rms)
Manufacturer: Eminence
EAN/GTin: 4049521025020

90,00 €

incl. 19 % VAT excl. shipping costs

Price:


Product.Nr. LE-D10A
Shippingweight: 5,45 KG
Delivery time: 3-4 days
Available on order Available on order Available on order 90.00 90.00
Qty:

10" Tiefmitteltöner.
Nutzbar für kompakte Bassreflex-Gehäuse
Bekannt aus Jobst-Audio JL-Sat10 & JL-Sat210

Weight: 4,9 kg
Einsatz: Topteil

SPECIFICATION

  • Nominal Basket Diameter 10", 254 mm
  • Nominal Impedance 8 ohms
  • Power Rating Watts 350 W / Music Program 700 W
  • Resonance 66 Hz
  • Usable Frequency Range 63 Hz - 3.7 kHz
  • Sensitivity 98.8
  • Magnet Weight 56 oz.
  • Gap Height 0.375", 9.53 mm
  • Voice Coil Diameter 2.5", 63.5 mm

THIELE & Small Parameters

  • Resonant Frequency (fs) 66 Hz
  • DC Resistance (Re) 5.42
  • Coil Inductance (Le) 0.74 mH
  • Mechanical Q (Qms) 6.53
  • Electromagnetic Q (Qes) 0.35
  • Total Q (Qts) 0.33
  • Compliance Equivalent Volume (Vas) 30.5 liters / 1.1 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd) 121 cc
  • Mechanical Compliance of Suspension (Cms) 0.18 mm/N
  • BL Product (BL) 14.4 T-M
  • Diaphragm Mass inc. Airload (Mms) 32 grams
  • Efficiency Bandwidth Product(EBP) 189
  • Maximum Linear Excursion (Xmax) 3.5 mm
  • Surface Area of Cone (Sd) 344.9 cm²
  • Maximum Mechanical Limit (Xlim) 9.4 mm

MOUNTING Information

  • Recommended Enclosure Volume 
    Sealed N/A 
    Vented 12.7-37.9 liters/0.45-1.34 cu. ft.
  • Overall Diameter 10.09", 256.2 mm
  • Baffle Hole Diameter 9.05", 229.7 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.25", 6.4 mm
  • Mounting Holes B.C.D. 9.66", 245.4 mm
  • Depth 4.25", 108 mm

MATERIALS of Construction

  • Aluminum voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap

0 Review(s)


Write a review

JL-Sat10 - Crossover-Kit
Crossover-Kit for DIY assembling

35,00 €

incl. 19 % VAT excl. shipping costs

Neutrik Speakon chassis connector, NL4MPR
4-pole Speakon connector, round.

2,90 € -
3,35 €

incl. 19 % VAT excl. shipping costs

hex-nut A2 M4 stop
M4 fixing-nut, stainless-steel A2

0,15 €

incl. 19 % VAT excl. shipping costs

Rubberfeet 38x10
With steel washer 38x10mm

0,33 € -
0,35 €

incl. 19 % VAT excl. shipping costs

HEX Cylinder Head M6 x30mm
Allan Key screw blank/black

0,13 €

incl. 19 % VAT excl. shipping costs

© 2018 Fa. Jobst-Audio Shop von www.Jobst-Audio.de