Eminence Kappa-Pro-15LF C

Eminence Kappa-Pro-15LF C

15" LowMid - 4 Ohm - Ferrite


Type: TMT
Size: 15"
VC: 76mm
Impedance: 4 Ohm
Power: 600 W (rms)
Manufacturer: Eminence
EAN/GTin: 876358000388

196,35 €

incl. 19 % VAT excl. shipping costs

Price:

Offer until: 01.07.2017


Product.Nr. EKP15LFC
Shippingweight: 13,00 KG
Ausverkauft! Ausverkauft! 196.35 196.35
 15" Subwoofer / Tieftöner

Nutzbar für Bassreflex-Gehäuse.
Bekannt aus Jobst-Audio JL-Sub15 (LMB-115 Pro)

Gewicht: 11,25 kg
Einsatz: Subwoofer / 3-Wege Fullrange

Einzelstück

Messmuster, ohne VPE.
Wie neu, wurde nur 1x vermessen.


SPECIFICATION

  • Nominal Basket Diameter 15", 381 mm
  • Nominal Impedance 4 ohms
  • Power Rating Watts 600 W / Music Program 1200 W
  • Resonance 37 Hz
  • Usable Frequency Range 38 Hz - 1.8 kHz
  • Sensitivity 96.8
  • Magnet Weight 120 oz.
  • Gap Height 0.375", 9.53 mm
  • Voice Coil Diameter 3", 76 mm


THIELE & Small Parameters

  • Resonant Frequency (fs) 37 Hz
  • DC Resistance (Re) 3.34
  • Coil Inductance (Le) 0.94 mH
  • Mechanical Q (Qms) 10
  • Electromagnetic Q (Qes) 0.33
  • Total Q (Qts) 0.32
  • Compliance Equivalent Volume (Vas) 183.23 liters / 6.47 cu. ft.
  • Peak Diaphragm Displacement Volume 676.5 cc
  • Mechanical Compliance of Suspension (Cms) 0.18 mm/N
  • BL Product (BL) 15.4 T-M
  • Diaphragm Mass inc. Airload (Mms) 99 grams
  • Efficiency Bandwidth Product (EBP) 114
  • Maximum Linear Excursion (Xmax) 7.9 mm
  • Surface Area of Cone (Sd) 856.3 cm2
  • Maximum Mechanical Limit (Xlim) 18.0 mm


MOUNTING Information

  • Recommended Enclosure Volume 
    Sealed N/A 
    Vented Acceptable
  • Overall Diameter 15", 381 mm
  • Baffle Hole Diameter 14.0", 355.6 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.28", 7.1 mm 
  • Mounting Holes B.C.D. 14.56", 369.9 mm
  • Depth 6.57", 166.9 mm


MATERIALS of Construction

  • Copper voice coil
  • Kapton former
  • Ferrite magnet
  • Vented and extended core
  • Die-cast aluminum basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap

Recommended products

Top Hat AH SM 720, M20


Top Hat AH SM 720, M20

5,79 € -
5,89 €

incl. 19 % VAT excl. shipping costs

Rubberfeet 38x10


Rubberfeet 38x10

0,33 € -
0,35 €

incl. 19 % VAT excl. shipping costs

Bar Handle Marshall Medium


Bar Handle Marshall Medium

4,26 € -
4,50 €

incl. 19 % VAT excl. shipping costs

Handle Cover Butterfly


Handle Cover Butterfly

3,15 € -
3,50 €

incl. 19 % VAT excl. shipping costs

Foam Tape 20x3mm - 10m


Foam Tape 20x3mm - 10m

4,50 €

incl. 19 % VAT excl. shipping costs

HEX Cylinder Head M6 x40mm


HEX Cylinder Head M6 x40mm

0,17 €

incl. 19 % VAT excl. shipping costs

T-Nut M6


T-Nut M6

0,09 € -
0,15 €

incl. 19 % VAT excl. shipping costs

drilling screw flange bl 4 x19mm


drilling screw flange bl 4 x19mm

0,29 €

incl. 19 % VAT excl. shipping costs

Plasterboard screw flat bl 3 x13mm


Plasterboard screw flat bl 3 x13mm

0,10 €

incl. 19 % VAT excl. shipping costs

Neutrik Speakon chassis connector, NL4MPR


Neutrik Speakon chassis connector, NL4MPR

2,90 € -
3,35 €

incl. 19 % VAT excl. shipping costs

0 Review(s)


Write a review

file file size
EKP15LFC_Eminence_EN.pdf

EKP15LFC_Eminence_EN.pdf

0.56 MB
HEX Lenshead M6 x30mm
Allan Key screw blank/black

0,68 €

incl. 19 % VAT excl. shipping costs

T-Nut M6
M6 T-Nut, steel

0,09 € -
0,15 €

incl. 19 % VAT excl. shipping costs

© 2018 Fa. Jobst-Audio Shop von www.Jobst-Audio.de